CHAIRMAN UNIT OF HUBEI GUARDRAIL INDUSTRY ASSOCIATION CH
CH
BRAND NEWS
Advantages of Ogilvy hot galvanized guardrail and shutter
Release time:2022-05-26

1、 Basic information

● in order to install more quickly and conveniently and save human resources, hot-dip galvanized guardrails and louvers are installed in the most simple assembly mode, which greatly improves the installation efficiency of guardrail works.

● compared with other railings, it has the characteristics of environmental protection. In line with modern people's pursuit of environmental protection, it also fundamentally solves the problem that buildings are not randomly polluted.

● the use of hot-dip galvanized guardrail is universal. For example, due to the environmental and climatic characteristics of coastal and humid areas, the guardrail must be free from the influence of climate, acid, alkali, humidity and heat. However, the performance characteristics of hot-dip galvanized guardrail fully meet these requirements, so that it can be applied in different fields.

In short, the excellent characteristics of zinc steel railings are based on the advantages of traditional railings in the past. Therefore, the development of zinc steel railings will be overwhelming and quickly applied to the industry of building materials railings.


2、 Technical parameters

● the base material of galvanized steel profiles shall be continuous hot-dip galvanized steel sheets produced by Angang, Shougang, Baosteel, WISCO and Longgang. The hot-dip galvanized steel sheets shall meet the product requirements of dc51d+z-40/40 in Baosteel enterprise standard q/bqb 420-2009 continuous hot-dip galvanized + zinc iron alloy coated steel sheets and strips and dx51d+z-80 in Angang enterprise standard q/ asb385-2009 stamping and structural continuous hot-dip galvanized steel sheets and strips. The surface shall be subject to chromium free passivation, The sum of double-sided galvanized layer thickness shall not be less than 80g, and the minimum local thickness of polyester powder spraying thickness shall be ≥ 60 μ m。

● p66 wear-resistant nylon is used for the decorative cover at the bottom of the column, the decorative cover at the end of the handrail, and the connecting sleeve of the vertical rod. The decorative cover adopts the male and female plug-in and rear installation method.

● the surfaces of all railing shutter components, including galvanized steel profiles, decorative parts and decorative flowers, shall be sprayed with AkzoNobel or DuPont polyester powder. The minimum thickness of local coating on the surface of galvanized steel profiles shall not be less than 60 μ m. The minimum local thickness of aluminum profile and die cast aluminum surface coating shall not be less than 40 μ m。




PREVIOUS:HANDRAIL SHUTTER PROCESSING AND MANUFACTURING - KEY POINTS FOR STORAGE NEXT:Is it necessary to set protective railings for the low windows on the first floor? RETURN
ONLINE

4000-570-888 SEVEN × 24-HOUR

Copyright©2022 WUHAN ARGOSY TECHNOLOGY CO., LTD. All right reserved 鄂ICP备20000688-1 技术支持:Mework
Online Online Telephone Telephone

4000-570-888

WeChat
WeChat EMAIL EMAIL TOP TOP